Building Materials Wall Facade Yellow Clay Bricks preserves a LOPO archive entry from 2013. The page associated WR240 with a 240 × 60 × 11 mm main brick, two corner entries, full-body wording and old functional and commercial fields. Yellow, building material and facade describe the old record; they do not establish a current color, composition, product, facade suitability or complete wall solution. Verify every current product, project and supply conclusion independently.
Review the 2013 Wall-Brick Entry
The archive included main and corner dimensions, approximately 4% water absorption and broad acid, heat, non-slip, wear and firebrick wording. It also contained applications, packing, 20-foot-container capacity, minimum order, sample timing and order lead-time fields. Every item is preserved as history rather than a current specification or quotation.
| Archived main format | 240 × 60 × 11 mm |
|---|---|
| Archived corner formats | (174 + 50) × 60 × 11 mm or (60 + 60) × 240 × 11 mm |
| Archived construction wording | Full-body tile |
| Archived absorption field | About 4% |
| Archived title cues | Yellow, building material and facade; all require current samples and project-specific evidence |
The original WR240 image remains once as archived. It can support early color and surface discussion, but it is not a calibrated red standard, a verified scraped-texture range or proof of exterior suitability.
Building Material and Facade Are Archive Roles
The title’s building material and facade wording describes the historic subject broadly. It does not confirm a current material composition, product category, market approval or suitability for a particular facade. Ask for a current product identity, samples and documents tied to the actual building and destination.
LOPO can respond within its stated product scope, while the responsible professionals evaluate the complete project proposal. This page provides no generic structural or field-work instructions.
Create a current evidence register listing the proposed product, sample identities, dimensions, material documents, project evidence and unanswered questions. Do not fill a missing composition or facade field with the old title. This record helps every reviewer see which current document supports which part of the proposal.
Establish Yellow with Current Samples
Yellow fired clay may read as pale ochre, sandy, golden or warmer brown depending on current body, surface and light. The 2013 word and web image do not establish an undertone, range or control standard. Compare representative labelled pieces with adjacent materials under relevant lighting.
Record lighter, typical and darker outcomes, sample dates and product identity. A color approval remains separate from archived absorption, firebrick or other functional wording and from facade suitability.
Review the labelled pieces at useful viewing distances and with glass, metal, stone, render or other neighboring finishes. Document lighting, sample date and accepted range. If the product or finish changes, update the sample and evidence register together rather than allowing the WR240 photograph to remain the implied standard.
Use Archived Formats Only as Design Cues
The 240 × 60 mm face can inspire fine horizontal courses or vertical texture. The corner notations may trace former return pieces, yet they do not confirm current geometry, tolerance, colour matching, compatibility or supply. Request dated drawings for every proposed field and corner unit before updating elevations and quantities.
Qualified professionals must coordinate the building-specific substrate, movement, interfaces and wall proposal with current system information. This page offers no generic loads, spans, support spacing, anchors or installation instructions. If the current tile differs from the archive, revise design records, sample approvals and procurement information together.
Keep material and function claims historical
Archive boundary: full-body material wording, the main and corner dimensions, about 4% absorption, acid, heat, non-slip, wear and firebrick functions, uses, packing, 20-foot-container capacity, MOQ, sample timing and order lead time belong only to the 2013 page.
None of the old function terms establishes present performance, classification or project suitability. Heat-resistant or firebrick language is not a current fire conclusion. Ask for dated reports or declarations that identify the exact proposed product, specimen, method, result, scope and market. Let qualified project reviewers decide which criteria and approvals apply.
Reconfirm available sizes, surface, red range, corner units, quantity, packaging, minimum order, production window, delivery and payment in a current quotation. Keep samples, drawings, evidence and commercial records traceable to the same candidate so information from different tile families is not mixed.
Explore current products and project ideas
Review LOPO’s current terracotta tile overview for present colors, surfaces and formats.
Browse terracotta projects for narrow modules and facade rhythm.
Visit the architectural terracotta gallery to compare brick, tile and panel references.
Use the LOPO contact page for current samples, drawings and documentation.
Reference projects can sharpen colour and scale decisions, but their exact materials, assemblies, evidence and approvals do not transfer automatically.
Request a Current Yellow Clay Brick Review
Share the country, wall location, drawings, approximate area, target yellow-clay range, facade appearance direction, corner conditions, destination and required documents. Mention WR240 and the archived main and corner formats as source references, not confirmed current specifications.
Email roger@lopoterracotta.com or use the contact form. Request current product identification, representative labelled samples, verified dimensions, applicable evidence and current commercial terms.
Create a dated comparison register for product code, appearance, dimensions, corners, sample role, drawing revision, evidence and commercial status. Keep visual approval separate from technical and supply review. If a successor product is offered, use its current identifier consistently and preserve the 2013 page only as a historical reference.
Before approval, confirm that current field and corner samples, drawings, evidence and commercial records all identify the same proposed tile. Update every linked record if the yellow range, facade appearance, dimensions or product identity changes.