LW770 appears in the LOPO archive as a special-use red terracotta panel for a stair floor, with “anti-slip” included in the legacy title. It is best understood as a historical design lead rather than a purchasable specification. The old record supplied no model size and mixed this stair-focused item with generic facade information. This page separates those layers, preserves the useful identity of the reference, and sets out the evidence a current stair or floor enquiry should request.
LW770 archive snapshot
The catalogue entry associated LW770 with natural clay, a red colour and stair-floor use. Its size field contained only a slash, so the archive does not establish dimensions. Although customised design and older certification language also appeared on the page, neither should be presented as a current commitment without confirmation.
| Item | LW770 |
|---|---|
| Archived use | Stair floor |
| Archived size | Not stated; shown as “/” |
| Archived colour | Red |
| Status | Legacy model reference; current option to be verified |
This retained image is the generic photograph used in the historic body. It does not show enough stair-specific detail to verify the LW770 surface, edge or present product appearance.
Reading the “anti-slip” description responsibly
“Anti-slip” communicates the original product intention, but it is not a current slip-resistance result. Traction depends on the exact surface, production finish, contamination, wear, cleaning regime and whether the location is dry, intermittently wet or exposed. A general label cannot answer those project conditions, and the old page did not identify a relevant test method, classification or report tied specifically to LW770.
For a present enquiry, state the intended environment and the standard or regulatory pathway required by the project. Ask for current evidence for the exact proposed surface. The architect, accessibility adviser and other responsible consultants should decide whether that evidence meets the project criteria.
Design intent for stair and floor zones
A fired-clay stair component can extend a material palette from a wall or landing into a circulation feature. Red terracotta brings warmth and a tactile, mineral character, while a purposeful stair-floor piece can visually clarify the transition between horizontal and vertical surfaces. LW770 may therefore be useful when developing coordinated treads, risers, landings or adjacent floor areas, but its archived name does not prove which of those parts were once available.
Define the desired component in drawings and words. Include the visible faces, edge expression, adjoining materials and traffic context. This is design information for manufacturer review, not a substitute for a project-specific stair assembly designed and approved by the responsible professionals.
Colour, texture and visual continuity
The archived red designation is broad. Fired-clay reds can read as orange, brick, brown-red or deeper iron-rich tones depending on clay body, firing, surface and light. A current physical sample is essential when LW770 is meant to coordinate with wall panels, brickwork, stone, metal nosings or interior finishes. Review samples in the intended lighting and next to the actual neighbouring materials.
Texture requires the same discipline. A coarse appearance may support the visual idea of grip, yet appearance alone does not establish measured slip behaviour or cleaning suitability. Ask for a clearly identified sample and keep its approval record linked to the proposed product description and current test evidence.
Information to confirm before specification
The old body included generic panel dimensions, weights, performance figures, certifications, commercial terms and production-capacity statements. Those entries are archive-only and should not be applied to LW770. They may describe a different facade panel, an earlier test specimen or a historic business condition. No current claim about strength, water absorption, frost performance, fire classification, sustainability, lead time or certification should be inferred from them.
Request a current data package that identifies the proposed product, material, nominal dimensions, tolerances, surface, colour range, edge options, intended use and applicable test records. Confirm sample availability, minimum quantities, packaging, current programme and destination requirements in the quotation. The project team should separately coordinate the complete stair or floor build-up, substrate, transitions, movement strategy, safety obligations and maintenance plan without relying on this legacy catalogue entry.
Archive boundary: LW770 identifies the old concept. Only a current written offer, approved sample and relevant supporting documents can define a product for procurement.
Compare current products and project references
Review LOPO’s current stair tread product guide for the present enquiry route and available development discussion.
Browse the terracotta flooring gallery for material and colour context, while treating every precedent as project-specific.
Explore the wider architectural terracotta gallery to compare fired-clay applications across walls, floors and circulation spaces.
Use the contact page to request samples, current product information and a quotation.
These links can frame a discussion, but they do not turn archived LW770 statements into current specifications or approvals.
Request a current review of LW770
Send the project location, interior or exterior use, expected exposure, applicable slip-resistance requirement, drawings, desired red tone and texture, visible edge intent, approximate quantity and delivery schedule. Mention LW770 and explain which aspect of the archived concept you want to retain.
Email roger@lopoterracotta.com or contact LOPO Terracotta. Ask the team to identify a current product path, provide representative samples and issue up-to-date documentation for the exact option proposed. That review is the appropriate basis for design decisions; the legacy title and generic archive data are not.
Where an approval sequence involves several parties, nominate the person who will consolidate comments on colour, texture, geometry and evidence. Record which sample was reviewed, under what conditions, and whether it is a visual reference or the proposed production benchmark. This avoids treating a generic catalogue image as a final approval. It also helps the manufacturer answer open questions in a single, traceable response before commercial commitments are made.