Red water masonry brick, Red water masonry brick, Construction drawing of red clear water masonry brick, Grey clear water masonry brick, Real gray grey masonry bricks, Grey clear water masonry brick,……
how about it
Are the masterpieces of contemporary brick architecture
Every project is different
But there is a connection logic inside
Brick is not a material, but a formal unit
In the future, the terracotta curtain wall will gradually demonstrate its outstanding quality in the curtain wall industry. So, what is your opinion about Terracotta Curtain Wall Development Prospect?
The natural processing process makes the clay brick itself contain only a small amount of chemical impurities, and its internal structure is not easily affected by acid rain.
Architectural Terracotta Panel Project – The narrow and triangular triangles of the two urban roads at a 70 degree angle define the site of the project.
In this way, the framework of the design is basically there, the tree is still there, and the old factory is still there.
LOPO has now developed two thickness of long bricks to meet the needs of different buildings: 500mm x 40mm x 15mm, and 500mm x 40mm x 60mm.
How to improve the inspection pass rate of non-beam dry hanging terracotta curtain wall to 95%
The word “Garden” covers the true meaning of the project – gardening landscape, architecture and life.
with a total construction area of 80640.1 m2, a total covering area of 34476.8m2, and a total of 378 houses
The project features modern and history elements in design, combined cultural and life well together. 18mm terracotta panel is adopted by designer as the curtain wall material for the building facade.
Terracotta panel is a popular building material nowadays. It has the characteristics of thermal insulation, noise reduction, green environmental protection and no pollution.
The project located at No. 36, Baojiao North Road, Xihu District, Hangzhou. It is a comprehensive public welfare marine research institution.
Embed the flexible brick slips fully into the freshly applied adhesive and leave 8-12mm wide joints between the brick slips. Gently push the slips and move up and down to adjust the joints, make sure the edges of the brick slips are fully coated with the adhesive.
The color of clay and terracotta products may be affected by a variety factors. The traditional color of clay is orange, but if left it in the kiln for a long time, the material will appear red or brown.