The main difference between clay brick tile and ceramic tile is the water absorption rate.The penetration of clay brick is relatively high and the weight is relatively light.
Read MoreNews
Terracotta Panel Project -Nanjing Metro Linshan Station
The LOPO Terracotta Panels are adopted by architects for Nanjing Metro Line S3.The terracotta rainscreen system can effectively prevent most snow or rainwater from penetrating into the facade. Furthermore, it can collect a small amount of rainwater and direct it to flow outward from the back of the system so as to protect the wall structures.
Read MoreApplication of 3D wood-look Terracotta Panels
The 3D inkjet technology makes the texture on the terracotta panels more natural, vivid, diverse and richer. In terms of stone surface and wood surface texture, 3D inkjet terracotta tile has the possibility to replace stone and natural wood materials, and embraces unlimited design possibilities for the building facade or interior walls.
Read MoreCultural Stone
High-grade artificial cultural stone has the characteristics of environmental protection, energy saving, light texture, rich color, mildew, non-combustible, good resistance to thawing and easy installation.
Read MoreColor Mix And Match Injects Vitality To Jintai Plaza
Jintai Plaza adopted LOPO mixed color terracotta panels,each facade plane of mixed color shades gives the architecture sense of layering, breaking away from the boring monochromatic facade.
Read MoreTerracotta Baguette Series
The terracotta baguette series are energy-saving and environmentally friendly, sturdy and durable, colorful and natural, never fade, safe and non-flammable, have good sound insulation and heat insulation, acid and alkali resistance, self-cleaning in wind and rain, low maintenance cost.
Read MoreApplication of LOPO Terracotta Baguettes in Growthbuilt Anglicare Woolooware Shores
LOPO supplied 6000 meters of white terracotta baguettes for this aged care project,white facae cladding is simple and fresh, making the whole community look vibrant.
Read MoreGlazed Terracotta Panel
Glazed terracotta panel have higher abrasion resistance than ordinary terracotta panel, and they are easier to clean. As a curtain wall material, it has the advantages of environmental protection and energy saving, moisture-proof, breathable and sound insulation, rich color and long-lasting as new and wide application range.
Read MoreFrosted Clay Brick Tile
The frosted clay brick tile is a new type of interior and exterior wall decorative surface material that is made of clay as the main base material, and after a good ratio, it is specially processed.
Read MoreTerracotta Rainscreen in Ningbo University library
The terracotta-panel curtain wall for the library comes from LOPO’s classic brick-red, 18mm-thick Terracotta Rainscreen series, which offers a display surface width of 200/400/500 mm. A total supply of nearly 5,000 square meters is dedicated to this project.
Read MoreIntroduction of classic clay brick tile
clay brick tiles are building materials that can be used to decorate the exterior walls of various types of building facilities, including stations, halls and halls, restaurants, waiting rooms, squares, parking lots, parks, sidewalks and other areas.
Read MoreTerracotta Wall in the Exhibition Hall
LOPO produced terracotta wall panels with sandblast surface for this project and customized a small part of micro-carved terracotta. Although it is not the main component of the building facade material, but its presence brings vitality to the building by organically integrating different building materials and preserving architectural elements and city’s culture.
Read MoreHunan University of Technology and Commerce
The design of the building facade of the Hunan University of Technology and Commerce mainly adopts LOPO terracotta cladding and glass curtain wall. The total area of the terracotta panels of this project is about 20,000 square meters.
Read MoreFacade Tiles and Terracotta Baguettes in HKB archives bank
The Terracotta Panels of the upper facade was cut into fine elongated strips in advance at the LOPO’s plant. In addition, a 45-degree miter cutting was applied at the edges of the tiles so as to form vertically parallel lines.
Read MoreTerracotta for City Complex Facade
The architects chose similar color terracotta panels, such as light yellow and red-orange, and created a lively and bright architectural image through the color block distribution and facade segmentation. For this project, LOPO produced 27mm Terracotta Panel with the surface height of 70 cm, 55 cm and 50 cm (including window sills), and the total quantity supplied was 16,000 square meters.
Read More